M/MSH

Small farm

Mounted version

 

Hopper 1150 l

From 880 kg

Min. 60 HP

Machine designed for small and medium farms. The placement of the center of gravity near the tractor reduces the power requirement. The machine is connected through three-point hitch directly to the tractor or to the tillage equipment, semi-mounted during work on its own axle. As standard, the machine is equipped with a mechanical fan drive (540 RPM or 1000 RPM). Volume of seed hopper is 1150 liters.

 

Seed drill PNEUSEJ M is produced with rigid frame and coulter bar in working width 3 m – 4 m – 4,5 m. In offer we have seed drill MSH, which is the same model that M, but the main advantage by MSH is hydraulically folding frame and coulter bar to 3 m transport width. Seed drill PNEUSEJ MSh is produced in working width 4 m – 4,5 m.

It is possible to equip the machine with wide tires with dimension 26x12-12”.

Main
part of the machine

https://pneusej.sk/wp-content/uploads/2018/12/davkovaci-system.jpg

Dosing system

Central feeding is the heart of the whole system. It enables maximally precise metering of sowing in the range 2 – 380kg per hectare. The central completely closed seed roller precisely proportionates the seed and supplies it to the injector canal, where it is mixed with a stream of air from the ventilator, and then it goes to the distributor through the diffusion tube, and goes further into the individual sowing coulters through the seed tubes. The residual seed in the hopper is minimal and can be spilt out by means of discharging flap.

Electronic control units

Drillmat III

In standard equipment is the drive of dosing unit solved by drive of stepping wheel. In this case, the customer can use the simple electronic and control device Drillmat III, which offer : signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

https://pneusej.sk/wp-content/uploads/2018/12/drillmat-2.jpg
https://pneusej.sk/wp-content/uploads/2018/12/drill-control.jpg
Drill Control

The seed drill can be equipped with the electronic drive of dosing unit Drill Control. This electronic and control device offers drive of one dosing unit using electric motor. Simple and accurate calibration is performed using the calibration button, another big advantage is to increase or decrease the seed rate while driving. In addition to these advantages it offers electronic equipment: signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

Hopper

Seed drill is equipped as standard with a 1150 liters hopper. Operator step ensures convenient access to the hopper, which makes it easier and more secure to fill and clean the machine. Large filling opening is equipped with a sieve to catch any types of dirt, and its dimensions offers high comfort during filling.

1. Drive of ventilator

In standard equipment is the seed drill to use with mechanical drive of ventilator, which is specific for low cost maintenance. In additional equipment is possible  to equip the machine with hydraulic drive of ventilator, that improves user comfort and ventilator life.

Mechanical drive of ventilator
Hydraulic drive of ventilator
Hydraulic drive of ventilator for tractors with valve for flow control

2. Sowing coulters

On this type of seed drill is possible to use sowing coulters DXD RC I and DXD RC I with fertilizer applicator.

Sowing coulters DXD RC I
Sowing coulters DXD RC I with fertilizer applicator

3. Pressure wheels

Every sowing coulter can be equipped with pressure wheels, which is placed behind the seeding coulter. The main advantage of the pressure wheels is keeping sowing depth. In addition, the pressure wheels function is as a roller to press the soil to the seed. Thanks to these factors, the seed is perfectly placed in the seed bed.

4. Beam of S-harrow springs

Beam of S-harrow springs takes care of optimal seed covering even in a condition with high amount of crop residue. Big advantage is adjustment of angle and pressure of harrows.

Technical parametersM 300M400 / MSh400M450/ MSh450
Working width (m)344.5
Transport width (m)34/34,5/3
No. of rows (pc)20/2424/28/3228/32/36
Row spacing (cm)15/12,516,7/14,3/12,516/14/12,5
Hopper (l)1150
CoultersDXD RCI
Coulter pressure (kg/pc)35
Depth adjustmentCentrally / hydraulically
Fan drive540 RPM, 1000 RPM or hydraulic drive
Weight without seed (kg)88010001060
Power required (HP)6080100
Power required (kW)456074
Working speed (km/h)5-12
Efficiency (ha/h)1,5-3,82,2-4,53-5,8
Connection via lower link3- bodový záves kat.II
Feed opening (m)1,34x1,16
Filling height (m)2.02
Track tillers of seed drill (pc)2x2
Tires23x85-12 alebo 26x12-12

©2018 Pneusej Hlohovec s.r.o.web design and development by ds class s.r.o.