FT1

Small farm

Mounted version

Hopper 1100 l

From 480 kg

Min. 110 HP

Seed drill designed for small and medium farms. An essential advantage of the machine is even weight distribution, which helps to decrease power requirement of the tractor by 20 percent. Seed drill FT1 offers several possibilities of use with seed and fertilizer application. FT1 is primarily designed for combination with Pneusej seed drills.

Seed drill FT1 have two possibilities:

Front tank FT1 – for seeding is a front mounted seed hopper with capacity 1100 liters, combined with rear mounted coulters. It is possible to add the hopper capacity for another 600 liters. The rear part is produced in working width 3 m – 4 m.

Front tank FT1 – for fertilizer is a front mounted hopper designed as a fertilizer tank with a combination with precision planters (max. 8 rows) and with machines for soil tillage up to 6 m working width. Hopper surface as well as parts of dosing unit are produced to withstand different types of fertilizer.

Main
part of the machine

https://pneusej.sk/wp-content/uploads/2018/12/davkovaci-system.jpg

Dosing system

Central feeding is the heart of the whole system. It enables maximally precise metering of sowing in the range  – 380kg per hectare. The central completely closed seed roller precisely proportionates the seed and supplies it to the injector canal, where it is mixed with a stream of air from the ventilator, and then it goes to the distributor through the diffusion tube, and goes further into the individual sowing coulters through the seed tubes. The residual seed in the hopper is minimal and can be spilt out by means of discharging flap.

Electronic and control units

Drillmat III

In standard equipment is the drive of dosing unit solved by drive of stepping wheel. In this case, the customer can use the simple electronic and control device Drillmat III, which offer : signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

https://pneusej.sk/wp-content/uploads/2018/12/drillmat-2.jpg
https://pneusej.sk/wp-content/uploads/2018/12/drill-control.jpg
Drill Control

The seed drill can be equipped with the electronic drive of dosing unit Drill Control. This electronic and control device offers drive of one dosing unit using electric motor. Simple and accurate calibration is performed using the calibration button, another big advantage is to increase or decrease the seed rate while driving. In addition to these advantages it offers electronic equipment: signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

1. Drive of ventilator

In standard equipment is the seed drill to use with mechanical drive of ventilator, which is specific for low cost maintenance. In additional equipment is possible  to equip the machine with hydraulic drive of ventilator, that improves user comfort and ventilator life.

Mechanical drive of ventilator
Hydraulic drive of ventilator
Hydraulic drive of ventilator for tractors with valve for flow control

2. Hopper

Seed drill is in standard equipment with hopper of capacity 1,100 liters. It is possible to add the hopper capacity for another 600 liters.

FT1 - na sejbu

Technical parametersFT1 300 - for seedFT1 400 -for seed
Working width (m)34
Transport width (m) (m)33
No. of rows (pc)20/2424/28/32
Row spacing (cm)15/12,516,7/14,3/12,5
Hopper (l)1100 + 600
CoultersDXD RCI
Coulter pressure (kg/pc)35
Depth adjustmentCentrally / hydraulically
Fan drive1000 RPM or hydraulic drive
Weight without seed (kg)480
Weight of coulters without seed (kg)580640
Power required (HP)110150
Power required (kW)82111
Working speed (km/h)5-12
Efficiency (ha/h)1,5-3,82,2-4,5
Connection via lower linkCat. III
Feed opening (m)2,17x1,11
Filing height (m)1.6
Track tillers of seed drill (ks)2x2
Tires23x85-12

FT1 – na prihnojovanie


Technical parameters
FT1 300 for fertilizationFT1 400 for fertilizationFT1 450 for fertilization
Working width (m)344.5
Transport width (m) 3
Hopper (l)1100 + 600
Depth adjustment mechanically 1000 RPM or hydraulically
Weight without seed (kg) 480
Power required (HP)130
Power required (kW)97
Working speed (km/h)5-12
Efficiency (ha/h) 1,5-3,82,2-4,53-5,8
Connection via lower linkCat. III
Feed opening (m)2,17x1,11
Filing height (m) 1.6

©2018 Pneusej Hlohovec s.r.o.web design and development by ds class s.r.o.