MKC / MKC Magna

Small farm

Mounted version

Hopper 1150 / 1600 l

From 1140 / 1210 kg

Min. 140 HP

Seed drill MKC is designed for combination with active of passive soil cultivation machines, primarily for small and medium farms. The seed drill is produced in working width 3 m – 4 m – 4,5 m. As standard, the machine is equipped with a 1150 liters hopper, with a possibility to choose increased capacity of 1300 or 1600 liters. It is possible to use the machine separately with the use of universal chassis, that can be connected with quick-attach A-frame. Seed drill MKC can be combined with PSK power harrow.

Robust design of seed drill MKC-Magna ensures good performance under hard conditions. The machine is connected to power harrow or universal chassis for solo seeding, with the use of quick-attach A-frame. The seed hopper has capacity of 1600 liters as standard, and the working width is 3 m – 4 m – 4,5 m.

Main
part of the machine

https://pneusej.sk/wp-content/uploads/2018/12/davkovaci-system.jpg

Dosing system

Central feeding is the heart of the whole system. It enables maximally precise metering of sowing in the range  – 380kg per hectare. The central completely closed seed roller precisely proportionates the seed and supplies it to the injector canal, where it is mixed with a stream of air from the ventilator, and then it goes to the distributor through the diffusion tube, and goes further into the individual sowing coulters through the seed tubes. The residual seed in the hopper is minimal and can be spilt out by means of discharging flap.

Electronic and control units

Drillmat III

In standard equipment is the drive of dosing unit solved by drive of stepping wheel. In this case, the customer can use the simple electronic and control device Drillmat III, which offer : signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

https://pneusej.sk/wp-content/uploads/2018/12/drillmat-2.jpg
https://pneusej.sk/wp-content/uploads/2018/12/drill-control.jpg
Drill Control

The seed drill can be equipped with the electronic drive of dosing unit Drill Control. This electronic and control device offers drive of one dosing unit using electric motor. Simple and accurate calibration is performed using the calibration button, another big advantage is to increase or decrease the seed rate while driving. In addition to these advantages it offers electronic equipment: signaling of seed level, electronic hectare counter, ventilator speed signaling, dosing unit control, 2x2 el. magnetic shut off valves Accord for tramlining.

Hopper

Seed drills MKC and MKC Magna are designed for small and medium farms, therefore is the hopper on the seed drill MKC standard equipped 1150 liters, but it is possibhle to expand the hopper to 1300 liters or 1600 liters.

1. Drive of ventilator

In standard equipment is the seed drill to use with mechanical drive of ventilator, which is specific for low cost maintenance. In additional equipment is possible  to equip the machine with hydraulic drive of ventilator, that improves user comfort and ventilator life.

Mechanical drive of ventilator
Hydraulic drive of ventilator
Hydraulic drive of ventilator for tractors with valve for flow control

2. Seed drills agregation

The seed drill can be used for solo sowing or in combination with power harrow.

 

Machines for soil preparation

Seed drill is possible to aggregate with power harrow Pneusej PSK or with universal chassis.

Machines for soil preparation
Universal chassis for solo seeding with track tillers

3. Sowing coulters

On this type of seed drill is possible to use sowing coulters DXD RC I and DXD RC I with fert applicator.

Sowing coulters DXD RC I
Sowing coulters DXD RC I with fertilizer applicator

4. Pressure wheels

Every sowing coulter can be equipped with pressure wheels, which is placed behind the seeding coulter. The main advantage of the pressure wheels is keeping sowing depth. In addition, the pressure wheels function is as a roller to press the soil to the seed. Thanks to these factors, the seed is perfectly placed in the seed bed.

5. Beam of S-harrow springs

Beam of S-harrow springs takes care of optimal seed covering even in a condition with high amount of crop residue. Big advantage is adjustment of angle and pressure of harrows.

Technical parametersMKC/ MKC Magna 300MKC/ MKC Magna 400MKC/ MKC Magna 450
Working width (m)344.5
Transport width (m)344.5
No. of rows (pc)20/2424/28/3228/32/36
Row spacing (cm)15/12,516,7/14,3/12,516/14/12,5
Hopper (l)1150/1600
CoultersDXD RCI
Coulter pressure (kg/pc)35
Depth adjustmentCentrally / hydraulically
Fan drive540 RPM, 1000 RPM or hydraulic drive
Weight without seed (kg)1140/12101200/12801250/1340
Power required (HP)140160180
Power required (kW)104119134
Working speed (km/h)5-12
Efficiency (ha/h)1,8-3,82-4,32,5-5,8
Connection via lower linkCat. III
Feed opening (m)1,34x1,22
Filling height (m)2.4

©2018 Pneusej Hlohovec s.r.o.web design and development by ds class s.r.o.